Beli hozan tools di monotaro.id

Tool set for maintenance and inspection of facilities and equipment. The case uses a durable B-56-B toolbox. *With tool box.

B typePurpose:For replacing the HS-26 soldering iron.

-By the three-sided cut wedge line in the main body, you will not get tired even for long working hours such as assembly line.-A ceramic heater with excellent electrical insulation and thermal conductivity is used.-Lightweight slim size with grip diameter of phi10mm.

Alat pengupas kabel yang praktis dan mudah. Cukup masukkan kabel dan tekan pegangan untuk mengupas kulit kabel tanpa merusak kawat kabel. Anda juga bisa mengupas kulit kabel dari bagian tengah kabel.Digunakan untuk:- Untuk mengupas kulit kabel dari bagian tengah kabel.- Untuk memotong kabel tembaga dan kabel composite aluminium.- Untuk crimping insulated terminal.

-A function of checking shape, which is the handle does not come back until the terminal will be crimped completely, is attached.-For crimping bare terminal/P.B type sleeve.

Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate which allows them to withstand contact with dry ice for 267 seconds. RaoTex inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.

Use :FA, robot, vending machines, transportation systems, shop automation, food processing machines, cookers, packaging machines, etc. Mechatronics equipment repair and maintenance. Set content :[Tool bag] B-712, [Replacement stubby driver (+) No. 2/(-) 6.0] D-59, [Phillips screwdriver (+) No.0] D-540-100, [Phillips screwdriver (+) No.1] D-550-100, [Minus Driver (-) 4.0] D-640-100, [Turntable] H-11, [Fast soldering iron] H-600, [Solder] HS-363, [Solder suction line] HS-380-2.5, [Yasurimaru] K-170, [Flat Flat] K-172, [Slant Nipper] N-4-150, [Heavy Snip] N-838, [Radio Pliers] P-15-150, [Pringing Hook] P-64, [Tweezers] P-87, [Chain pliers] P-220, [Water pump pliers] P-245, [Hex love wrench set] W-81, [Hexagonal wrench 1.5/2.0/2.5/3.0/4.0/5.0/6.0/8.0/10.0mm W-96, [Monkey Wrench] W-230-200, [Socket Wrench Set] W-510, [Wrench 5.5x7/8x10/11x13/12x14/17x19/22x24mm] W-521, [Blow] Z-267, [Convex Rule] Z-341, Screw pliers, Cutter knives (Large), Steel Scales 150mm, Through Drivers (-) 6.0/(+) No.2/(+) No.3, Screw Case (Large), Pouch, Work gloves, Plastic hammer, Lock pliers

Useful for sorting device value.

Precision soldering iron compatible with lead-free solder, pursuing cost performance. By integrating the bit, heater, and sensor into one unit, temperature changes at the iron tip can be quickly caught and temperature controlled. Work stress due to the decrease in iron tip temperature is reduced. The newly designed iron with excellent heat insulation effects does not give uncomfortable heat to the operator even during long hours of work. Bit replacement work can be done quickly without tools. Equipped with a setting lock function required to control the working temperature. It is a PIN code system that does not require a card or key. With sleep function (sleep sensitivity/time setting type: 0 to 20°C, 0 to 999 minutes) Auto power off function (0 to 999 minutes time setting type) to prevent forgetting to turn off the power. Stations can be stacked. It does not take up space on the work desk even when using multiple units.

-Easy-to-use diagonal blade suitable for cutting copper wire, having stripping holes for electric wire.-Since a soft type elastomer grip is used, it reduces fatigue due to continuous work.-Blade hardness is HRC58.